ROBE Lighting ROBIN 600E Spot Used, Second hand

Used ROBIN 600E Spot moving light (1900 working hours) with new lamp in dual flight case.

Photos on request.

More details

2.02.368
Used

2,880.00 €

2,880.00 € per Piece

INQUIRE ABOUT THIS

 
About this product

ROBIN 600E

The ROBIN 600E Spot has a dramatically increased light output (from the 300 Series) and lower power requirements - thanks to an optimized optical path made from carefully selected components.

The super strong light-output can be maximised by using ROBE‘s unique HotSpot Control system together with the linear iris to create very powerful beam effects. An innovative patented cooling system ensures the best lamp operating temperatures and allows DMX controlled noise reduction. Users have complete control of all features of this fixture, making it ideal for environments where noise levels are critical and light output requirements are high.

Source
  • Lamp: Compact high-presure metal halide lamp
  • Base: PGJX28
  • Approved model: Philips MSR Gold 575/2 MiniFastFit
  • Control: Automatic and remote on/off
  • Ballast: Electronic
Optical System
  • Dichroic glass reflector for maximising the light efficiency
  • Beam angle: Zoom range: 10° – 45° (2° – min. zoom with iris, 60° max. zoom with frost)
Electromechanical Effects
  • Cyan: 0–100%
  • Magenta: 0–100%
  • Yellow: 0–100%
  • CTO: 0–100%
  • Hot-spot control: Hot-or-not-spot
  • Colour wheel: 7 replaceable "SLOT&LOCK" dichroic filters + open, trapezoid shape
  • Static Gobo wheel: 9 replaceable "SLOT&LOCK" black and white gobos + open
  • Rotating Gobo wheel: 7 rotating, indexable, replaceable "SLOT&LOCK" dichroic and glass gobos + open
  • Iris: Motorized, stepless, up to 3 Hz
  • Prism: 3-facet 11° indexable prism rotating in both directions at different speeds
  • Frost effect: Separate, variable
  • Dimmer/Shutter: Full range dimming and variable strobe effect, Electronic strobbing "ZAP"
  • Motorized zoom and focus
  • Pan: 540°
  • Tilt: 280°
Control and Programming
  • Setting & Addressing: ROBE Navigation System 2 (RNS2)
  • Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2
  • Control channels: 23, 25, 32
  • 3 DMX protocol modes
  • 3-editable programs, each up to 100 steps
  • Stand-alone operation
  • QVGA Robe touch screen with battery backup gravitation sensor for auto screen positioning operation memory service log with RTC
  • Pan/Tilt resolution: 8 or 16 bit
  • Movement control: Tracking and vector
  • Colour wheel positioning: 8 or 16bit
  • Static gobo wheel positioning: 8 or 16bit
  • Rotating gobos: 8 or 16bit
  • Iris: 8 or 16bit
  • Frost: 8 bit
  • Focus: 8 or 16bit
  • Dimmer: 8 or 16bit
  • Ethernet port: Art-Net protocol, ready for ACN
  • Data in/out: Locking 3-pin & 5-pin XLR
  • Built-in analyser for easy fault finding
  • Optional wireless version available: CRMX™ technology from Lumen Radio
Static Gobos
  • Metal gobos - outside diameter: 26.9 mm, image diameter: 22.5 mm, aluminium, thickness: 0.5 mm
  • Glass gobo - high temperature borofloat
Rotating Gobos
  • Glass gobos - outside diameter: 26.8 mm, image diameter: 22.0 mm, thickness: 1.1 mm, max. thickness: 4.0 mm, high temperature borofloat or better glass
Thermal
  • Maximum ambient temperature: 45 °C (104 °F)
  • Maximum surface temperature: 80 °C (176 °F)
Electrical Specification
  • Power supply: Electronic auto-ranging
  • Input voltage range: 100–240 V, 50/60 Hz
  • Power consumption: 770 VA at 230 V/50 Hz
Mechanical Specification
  • Height: 516 mm (20.3 ") – head in horizontal position
  • Width: 433 mm (17.0 ")
  • Depth: 470 mm (18.5 ")
  • Weight: 21.7 kg (47 lbs)
  • Fixation option: Pan/Tilt-lock mechanism
Rigging
  • Mounting points: 2 pairs of ¼-turn locks
  • 2 x Omega bracket with ¼-turn quick locks
  • Safety chain/rope attachment point

Used Robe lighting

Robe lighting is the fastest growing moving light manufacturer in the world.
The company is based in the Czech Republic and produces high quality intelligent lighting projectors for the professional entertainment, architectural and themed environment markets.
The Robe brand is still experiencing record growth in all sectors and our products can be found on stages, in concert halls and TV studios all over the world.
Embedded in the company philosophy is the practice of working as closely with our business partners and end users as possible, listening to their needs, thoughts and wishes and understanding their markets.

Equalizer: A component designed to alter the frequency balance of an audio signal. Equalizers may be graphic, parametric, or a combination of both. Fade: A gradual increase in audio, i.e. a fade-up, or a gradual decrease in audio, i.e. a fade-down.Feedback: The transmission of current or voltage from the output of a device back to the input, where it interacts with the input signal to modify operation of the device. Feedback is positive when it's in phase with the input and negative when it's out of phase. Frequency: The number of cycles (vibrations) per second. In audio, audible frequencies commonly range from 20 to 20,000 cycles per second (Hz). In video, frequency is used to define the image resolution. Low-frequency video images depict large objects or images. Higher frequencies depict smaller objects (finer details). Frequency Response: A measure of what frequencies can be reproduced and how accurately they are reproduced. A measurement of 20 to 20,000 Hz, 3dB means those frequencies between 20 and 20,000 Hz can be reproduced no more than 3 dB above or below a reference frequency level. Full-Range: A speaker designed to reproduce the full range (20 Hz to 20 kHz) of audio frequencies.Gain: Increase in level or amplitude.Gooseneck: This refers to amicrophone with a flexible neck that is most frequently attached to a podium or lectern. It is designed to allow the speaker to raise or lower the microphone to a suitable height.Graphic Equalizer: A type of equalizer with sliding controls that creates a pattern representing a graph of the frequency-response changes. Raising sliders boosts the affected frequencies; lowering sliders cuts (attenuates) the affected frequencies.High Pass: A filter that passes high frequencies, and attenuates low frequencies. Same as low cut.Hz: Hertz or cycles per second. Something that repeats a cycle once each second moves at a rate of 1 Hz.Incue/Inq/In-Point: These words all refer to the initial few seconds of audio signifying the beginning of the production.Impedance: A measure of the impediment to the flow of alternating current, measured in ohms at a given frequency. Larger numbers mean higher resistance to current flow.KHz: Kilohertz or one thousand Hz.Lavaliere: A small microphone that attaches to clothing, allowing the speaker to have a hands-free presentation.Line Array: A group of speakers that have been arrayed or “built up” in the vertical or horizontal plane, which allow for a highly consistent sound field. A Line Array is perfect for medium to large audiences.Midbass: The middle of the bass part of the frequency range, from approximately 50 to 100 Hz (upper bass would be from 100 to 200 Hz). Also used as a term for loudspeaker drivers designed to reproduce both bass and midrange frequencies. Midrange: The middle of the audio frequency range. Also used as a term for loudspeaker drivers designed to reproduce this range. Mixer: This is the unit in which audio signals are directed from. A mixer provides for both mic and line input combinations while allowing you to control one or more outputs.MP3: MPEG-1 Audio Layer-3. Compression scheme used to transfer audio files via the Internet and store in portable players and digital audio servers. Natural Sound (NATS): The nonverbal audio that occurs in a non-studio setting. NATS can be used to help characterize the setting.Noise: An unwanted portion of a signal such as hiss, hum, whine, static, or buzzing.Passive: Not active. A passive crossover uses no external power and results in insertion loss. A passive speaker is one without internal amplification.Phase: Time relationship between signals; it's all relative.Power Output: A measure, usually in watts, of how much energy is modulated by a component.Preamplifier: A control and switching component that may include equalization functions. The preamp comes in the signal chain before the amplifiers.surround processor portion of the receiver and the input of the amplifier portion of the receiver.Processors: Anything that processes an incoming signal in some way. Surround processors, for example, can decode a Dolby Digital signal to send to an amp so you can hear it.Pulse Code Modulation: (PCM) a way to convert sound or analog information to binary information (0s and 1s) by taking samples of the sound and record the resulting number as binary information. Used on all CDs, DVD-Audio, and just about every other digital audio format. It can sometimes be found on DVD-Video.RF: Radio Frequency. Television signals are modulated onto RF signals and are then demodulated by your television's tuner. VCRs and DBS receivers often include channel 3 or 4 modulators, allowing the output signal to be tuned by the television on those channels. Also, laser discs used an RF signal for modulating Dolby Digital 5.1 soundtracks on some movies. This requires an RF demodulator (usually referred to as an AC3-RF demodulator) before or in the surround processor to decode the signal. RMS: Root Mean Square or the square root of the arithmetic mean (average) of the square's set of values. A reasonably accurate method of describing an amplifier's power output. Signal-to-Noise Ratio: A comparison of the signal level relative to the noise level. Larger numbers are better. Simultaneous Interpretation: This system allows attendees to hear the meeting in their own language. Sound field: The total acoustical characteristics of a space, such as ambience; number, timing, and relative level of reflections; ratio of direct to reflected sound; RT-60 time; etc. Speaker: A component that converts electrical energy into acoustical energy. SPL: Sound-Pressure Level. Measured in dB. Subwoofer: A speaker designed to reproduce very low bass frequencies, usually those below about 80 Hz.THX: Certification program for home theater equipment. Uses some proprietary features, but mostly assures a base quality level for a given room size. (See THX Select or Ultra.) Is compatible with any and all soundtrack formats. Stands for either Tom Holman's eXperiment, after the engineer who drafted the original standard, or is named after the company's founder George Lucas' first movie, THX 1138. Nobody agrees on which.

30 other products in the same category: