Martin Audio W8VDQ-WSX Used, Second hand

2pcs W8VDQ compact 3-way Differential Directivity Speakers with Dollies
4pcs WSX folded horn subwoofers
2pcs MA 5.0Q amplifiers.

Photos on request.

More details

1.01.465
Used

14,200.00 €

14,200.00 € per Set

INQUIRE ABOUT THIS

 
About this product

W8VDQ

Compact 3-Way Differential Directivity System

The Martin Audio W8VDQ combines line array and differential dispersion technologies to provide an advanced solution to the requirement of even coverage over wide angles and throw distances. Short throw horizontal dispersion is 120º, narrowing to 100º as throw increases.

Features
  • Compact, 3-way, differential directivity system
  • Hybrid quad 8” (200mm) LF + MF configuration
  • LF + MF - 102dB @ 2.83V, 1m (single cabinet)
  • Quad 1” (25mm) HF, all horn loaded - 106dB @ 2.83V, 1m
  • Max 131dB continuous, 137dB peak output
  • Consistent 100º long throw, 120º short throw
  • (-6dB) horizontal mid and HF pattern control
  • 30º vertical differential directivity, VDQ
  • Passive or bi-amp operation
  • Optional yoke/spigot mount adaptor
  • Compatible with WMX, WS18X and WS218X subwoofers
Applications
  • Live sound reinforcement
  • Corporate events
  • Theatre sound reinforcement
  • Fixed installations

WSX

The powerful WSX folded horn subwoofer is designed to complement Wavefront Series W8C touring systems to provide deep bass with maximum efficiency, speed and impact. Its classic Martin ‘S’ shaped folded horn is over 7 feet (2.1m) long and couples a powerful 18” (460mm) long excursion driver to the airload with a modified hyperbolic expansion law.

Features
  • Freq response: 38-150Hz +/- 3dB (half space)
  • LF limit: -10dB @ 28Hz
  • Rated Power: 600W into 8 ohms, 2400W peak
  • Sensitivity: 105dB (half space with band limited pink noise)
  • Maximum SPL: 132dB continuous, 138dB peak (half space with band limited pink noise)
  • Impedance: 8 ohms nominal
  • Crossover Freq: 150Hz or below
  • Crossover System: Martin Audio DX1 Loudspeaker Management System, MX4 or MX5. (See operating instructions)
  • Connectors: 2 x Neutrik NL8
  • Dimensions: (W) 572mm x (H) 1066mm x (D incl wheels) 1065mm /(W) 22.5ins x (H) 41.9ins x (D incl wheels) 41.9ins
  • Weight: 96kg (211 lbs)

MA 5.0Q

1U 4-Channel Power Amplifier
Features
  • Compact and space saving: 4 channels in 1 RU at 358mm / 14.1’’ depth
  • Minimal “carbon footprint” and operational cost of electricity
  • More watts, less weight: up to 5,000 W in 7.3 kg / 16 lb
  • Switch mode power supply, internally switchable 230/115V nominal
  • Fixed frequency switch mode amplifier output stages
  • Patented amplifier output filters with ripple cancellation network
  • Able to drive 100 V distributed lines directly without the need for transformers 1)
  • Optimized for 4Ω loads, thus ideally matching real-world scenarios in targeted applications
  • AC protection: shuts down power supply when AC mains voltage is outside operating range
  • Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still
  • maintaining full peak power output
  • DC protection: protects against infrasonic signal at the outputs
  • VHF protections: protects the loudspeakers against destructive non-audible, non-musical high frequency signals
  • Short circuit protection: protects the amplifier from short circuit or similar events on the outputs with automatic protection reset
  • Thermal protection: mutes outputs once output devices reach 75 ºC / 167 ºF; automatic unmute once temperature is down to 65 ºC / 149 ºF
  • Temperature controlled continuous variable speed fan, front to rear airflow
  • Recessed stepped level attenuators

Manufacturer Description

Glossary

30 other products in the same category: