DYNACORD Xa2-PRO ex-demo/like new

2pcs FX12-PRO horn-loaded coaxial loudspeakers
4pcs FX20-PRO horn-loaded subwoofers
2pcs L3600FD2x1800W Power Amplifier.

Photos on request.

The system is from a cancelled order and comes in original cardboard boxes

More details

1.01.000
Used

11,750.00 €

11,750.00 € per Set

INQUIRE ABOUT THIS

 
About this product

FX12-PRO

The FX12-PRO is a 12“ 2-way horn-loaded, coaxial, fullrange cabinet. The speaker is loaded with neodymium high performance transducers from Electro-Voice, a 12” ND 12A woofer and a 1.4” compression driver. Total nominal impedance is 8 Ohm. Total power handling is 350 W RMS. Power amps up to 1200 W at 8 Ohm can be used in order to produce maximum dynamic range without the danger of thermal overload in non-controlled situations. Both drivers are protected by a “Voice Coil Tracking” system called protection circuitry which prevents overheating. The dispersion angles of the horn are H 80° ✕ V 40°. Extreme high sensitivity 106 dB/1 W/1 m maximum sound pressure level is 137 dB. Internal crossover between mid and treble drivers 1000 Hz recommended crossover frequency to subwoofers 140 Hz, 18 dB/oct. Butterworth. Without subwoofers this cabinet will provide excellent transmission of speech on mid to long distances. The housing is made of 15 mm birch plywood and coated with a very robust textured paint. The front grille is made of powder coated steel. 4 casters and 2 ergonomic handles provide ease of handling. The cabinet features 6 flying points. With the flying bracket FB-FX12-PRO it can be easily hung on a truss and positioned to cover the audience.  

  • Neodymium ND6 driver
  • Neodymium ND12A mid transducer
  • Extremely high sensitivity, 106 dB SPL 1W/1m
  • Voice coil tracking protection

FX20-PRO

The FX20-PRO is a horn-loaded subwoofer with an Electro-Voice EVX180B 18“ high performance transducer. Nominal impedance is 8 Ohm, power handling 600 W RMS. Power amps up to 1200 W/ 8 Ohm can be used in order to have maximum dynamic range without the danger of thermal overload in noncontrolled situations. The sensitivity of the cabinet is 101 dB/1 W/1 m, the maximum SPL is 135 dB. The driver is protected by a “Voice Coil Tracking” system called protection circuitry which prevents overheating. Recommended crossover frequencies are 80 to 140 Hz depending on the application. The housing is made of 15 mm birch plywood and coated with a very robust textured paint. The front grille is made of powder coated steel. 4 casters and 4 ergonomic handles provide simple handling.

  • 600 W EVX 180B transducer
  • 30–150 Hz (-10 dB)
  • High-efficiency planar waveguide design
  • Voice coil tracking protection

Manufacturer Description

Glossary

30 other products in the same category: