Electrovoice X-Line Advance X2 Used, Second hand

18pcs X2-212/90 vertical line array loudspeakers on 6-way dollies
  6pcs X2-212/120 vertical line array loudspeakers on 6-way dolly
12pcs X12/128 dual 18" subwoofers, on dolly
16pcs TG7 Amplifiers fitted with TCM-28 DSP Cards
  2pcs Heavy Duty Flying grids
  2pcs Compact Grids
  4pcs 12U Amp Racks
  4pcs Audio/AC Audio Panels

Photos on request.

More details

1.01.018
Used

147,000.00 €tax excl.

147,000.00 € per Set

INQUIRE ABOUT THIS

 
About this product

X2-212/90

The X2-212/90 from Electro-Voice is a two-way vertical line array loudspeaker can be used in a wide variety of applications where wide bandwidth, vertical and horizontal directivity control, and high efficiency are required in a compact cost-effective package.
For high frequencies, the X2-212/90 utilizes two (2) ND6A high-output large format 3-inch titanium compression drivers directly coupled to a pair of PDH Plane Wave Generators on a 90° waveguide optimized for uniform pattern control and smooth, linear response.
For low frequencies, the DVN3125 12-inch neodymium woofer was developed using Finite Element Analysis to optimize motor, suspension, and electrical design for very low distortion, high efficiency, and maximum intelligibility at high SPL.
The MBH effectively emulates the acoustic behavior of a double line of four (4) 3-inch point sources to deliver superior mid-band coupling while maintaining the efficiency, power, and bandwidth of a 12-inch transducer.The Bi-amp only X2-212/90 requires proprietary Electro-Voice FIR-Drive.
Electro-Voice FIR-Drive is the combination of brick wall crossovers, phase correction, FIR EQ, peak anticipation limiter and Thermal Limiter. These technologies yield superior, nearly inaudible transducer protection with linear summation, smooth off-axis response, and unparalleled acoustical performance over the critical vocal and instrument range regardless of array size.
The X2-212/90 is a premium solution for demanding live sound reinforcement and fixed-install applications. The vertical trapezoidal enclosure is constructed of weather-resistant birch and coated with EVCoat for enhanced durability. The enclosure features the IRS, a captive twist-lock multi-angle arraying system designed by Electro-Voice to significantly reduce loadin/load-out time of any size array.
IRS has been engineered with the flexibility to deploy a system using the two (2) most common methods of array set-up:

  • Compression method by using a pull-up kit (Sold separately).
  • Fixed angles locked by using secondary rigging pins (Included).

X2-212/90 with IRS rigging is rated for use for up to 24 elements for normal arrays. LAPS 3 or higher (Line Array Prediction Software) accurately provides fast array configuration for coverage results, rigging details and allowed rigging configurations. It also provides information for the creation of steered/shaped subwoofer arrays.
The input panel provides dual Neutrik NL8 connectors for fast connectivity between loudspeakers. X2-212/90 is Bi-amp operation only.
The advanced acoustic and mechanical designs of X2 series loudspeakers, combined with LAPS 3, provide the tools and flexibility to easily design and deploy high performance vertical line array systems.

X2-212/120

The X2-212/120 from Electro-Voice is a two-way vertical line array loudspeaker that can be used in a wide variety of applications where wide bandwidth, vertical and horizontal directivity control, and high efficiency are required in a compact cost-effective package.
The high frequency section of the X2-212/120 utilizes two (2) ND6A high-output large format 3-inch titanium compression drivers directly coupled to a pair of PDH Plane Wave Generators on a 120° waveguide optimized for uniform pattern control and smooth, linear response. The low frequency section utilizes a DVN3125 12-inch neodymium woofer which was developed using Finite Element Analysis to optimize motor, suspension, and electrical design for very low distortion, high efficiency, and maximum intelligibility at high SPL.
The MBH effectively emulates the acoustic behavior of a double line of four (4) 3-inch point sources to deliver superior mid-band coupling while maintaining the efficiency, power, and bandwidth of a 12-inch transducer.
The Bi-amp only X2-212/120 requires proprietary Electro-Voice FIR-Drive. Electro-Voice FIR-Drive is the combination of brick wall crossovers, phase correction, FIR EQ, peak anticipation limiter and Thermal Limiter. These technologies yield superior, nearly inaudible transducer protection with linear summation, smooth off-axis response, and unparalleled acoustical performance over the critical vocal and instrument range regardless of array size.
The X2-212/120 is a premium solution for demanding live sound reinforcement and fixed-install applications. The vertical trapezoidal enclosure is constructed of weather-resistant birch and coated with EVCoat for enhanced durability. The enclosure features the IRS, a captive twist-lock multi-angle arraying system designed by Electro-Voice to significantly reduce loadin/load-out time of any size array.
IRS has been engineered with the flexibility to deploy a system using the two (2) most common methods of array set-up:

  • Compression method by using a pull-up kit (Sold separately).
  • Fixed angles locked by using secondary rigging pins (Included).

X2-212/120 with IRS rigging is rated for use for up to 24 elements for normal arrays. LAPS 3 or higher (Line Array Prediction Software) accurately provides fast array configuration for coverage results, rigging details and allowed rigging configurations. It also provides information for the creation of steered/shaped subwoofer arrays. The input panel provides dual Neutrik NL8 connectors for fast connectivity between loudspeakers. X2-212/120 is Bi-amp operation only.
The advanced acoustic and mechanical designs of X2 series loudspeakers, combined with LAPS 3, provide the tools and flexibility to easily design and deploy high performance vertical line array systems.
X2-212/120 is designed to be used as a wide coverage system using all 120° elements, or as the near-field element in a combined line array positioned below 90° elements.

X12/218

The X-Line Advance X12-128 subwoofer produces the greatest low-frequency impact and performance EV has ever developed. It is truly a state-of-the-art compact cabinet that delivers more LF output in a smaller footprint than other subwoofers available today.
In addition to its extremely high output capability, the X12-128 is designed to acoustically match seamlessly with any X-Line Advance top cabinet as a ground stack subwoofer. LAPS 3 or higher (Line Array Prediction Software) accurately provides fast array configuration for coverage results. It also provides information for the creation of steered/shaped subwoofer arrays.
It offers superior configuration flexibility for easier system design and setup, making it the standout subwoofer choice for any larger-format live or installed audio application

Specifications:
  • High-output, high-impact dual 18 inch ground stack subwoofer system.
  • Dual front and rear signal connection points for flexibility in system configurations,including cardioid setup for increased focus of low-frequency output.
  • Compact cabinets with low-profile footprint, suitable for under-stage applications.
  • Super-high-output DVF4180 woofers for low distortion at extremely high SPLs.
  • 105 dB sensitivity (1 W/1 m half space); 141/147 dB maximum SPL (continuous/peak).

Used Electro-Voice

At Electro-Voice, we Live For Sound. For more than 85 years, we have designed and engineered leading-edge sound reinforcement solutions that empower the performer, exceed the expectations of the audio professional and elevate the audience experience.
Wired Microphones,Wireless microphones,Digital Signal Processing,Power Amplifiers,Loudspeakers.

Glossary

30 other products in the same category: