MIDAS Audio PRO-X-CC-TP Ex demo/ Like new

1pc   PRO X-CC-TP digital mixing console
1pc   Neutron engine with 1pc Neutron-NB expansion card
4pcs DL231 stageboxes

Photos on request.

More details

1.06.491
Used

29,539.00 €

29,539.00 € per Set

INQUIRE ABOUT THIS

 
About this product

PRO X-CC-TP

Live Digital Console Control Centre with 168 Input Channels, 99 Mix Buses, 96 kHz Sample Rate and Touring Grade Road Case

The MIDAS PRO Series family moves up a gear with the PRO X control centre and the industry-changing NEUTRON Audio System Engine. Featuring 168 simultaneous input channels and 99 time-aligned and phase-coherent mix buses, the PRO X sets a new performance benchmark in high-profile live sound applications and is a truly impressive digital control surface for the engineer whose very livelihood depends on both unparalleled functionality and reliability. Like all PRO Series consoles, the PRO X features managed latency and 40 bit floating point processing precision.
HyperMAC and AES50 audio networking technologies allow the PRO X to dynamically assign up to 288 inputs and 294 outputs at 96 kHz sampling rate to any of its input channels and bus outputs on a scene-by-scene basis. This high level of connectivity, coupled with the large channel and bus counts, makes the PRO X equally at home in theatres and symphony halls as it is in live concert touring, outside broadcast and music festivals.

Features
  • Live performance digital console control centre with up to 168 simultaneous inputs
  • 99 time-aligned and phase-coherent mix buses
  • HyperMAC and AES50 networking allows up to 288 inputs and 294 outputs @ 96 kHz Sample Rate
  • Touring grade road case featuring marine grade plywood, aluminium extrusions and composite density protective foam
  • HyperMAC router with 192 bidirectional channels over copper and optical fibre
  • Provides dual redundant snake connection to the NEUTRON Audio System Engine
  • Snake connections up to 500 m with optical fibre or 100 m with CAT5/5e cable
  • 10 VCA (variable control association) and 8 POPulation groups
  • 36 assignable 1/3 octave KLARK TEKNIK DN370 graphic equalisers
  • Up to 40 simultaneous multi-channel digital signal processing effects algorithms
  • 29 MIDAS PRO motorised 100 mm faders
  • 2 daylight viewable 15” full colour TFT display screens
  • Fully interpolated touch sensitive controls
  • Optional wireless remote control with MIDAS MIXTENDER App for iPad
  • Three bay auto-ranging universal switch-mode power supply with N+1 redundancy
  • 3-Year Warranty Program
  • Designed and engineered in the U.K.

Used MIDAS Audio

Midas has been designing and manufacturing live performance mixing consoles for the worlds most demanding sound engineers, performers and production rental companies since the early 1970s.
The evolution of Midas consoles throughout the 30-year history of this classic marque has always paralleled, and often led, increasingly sophisticated audio innovations for the world-wide entertainment technology industry. Raising the standards of sonic quality through continual research and development has always been - and still remains - our overall aim.
Equally important to us is the design and implementation of many new areas of control functionality and user-friendly desk operation to anticipate and accommodate the rapidly changing and expanding needs of audio professionals who specify Midas consoles for their major tours, festivals, international events, broadcast projects and prestigious fixed installations.
The Midas design pedigree has, since our birth, been founded upon a track record of achieving a unique symbiosis with working sound engineers around the planet - engineers who respect and endorse our proven technology in the light of their responsibilities to their internationally-based clients who are themselves the leading lights of our industry.

Equalizer: A component designed to alter the frequency balance of an audio signal. Equalizers may be graphic, parametric, or a combination of both. Fade: A gradual increase in audio, i.e. a fade-up, or a gradual decrease in audio, i.e. a fade-down.Feedback: The transmission of current or voltage from the output of a device back to the input, where it interacts with the input signal to modify operation of the device. Feedback is positive when it's in phase with the input and negative when it's out of phase. Frequency: The number of cycles (vibrations) per second. In audio, audible frequencies commonly range from 20 to 20,000 cycles per second (Hz). In video, frequency is used to define the image resolution. Low-frequency video images depict large objects or images. Higher frequencies depict smaller objects (finer details). Frequency Response: A measure of what frequencies can be reproduced and how accurately they are reproduced. A measurement of 20 to 20,000 Hz, 3dB means those frequencies between 20 and 20,000 Hz can be reproduced no more than 3 dB above or below a reference frequency level. Full-Range: A speaker designed to reproduce the full range (20 Hz to 20 kHz) of audio frequencies.Gain: Increase in level or amplitude.Gooseneck: This refers to amicrophone with a flexible neck that is most frequently attached to a podium or lectern. It is designed to allow the speaker to raise or lower the microphone to a suitable height.Graphic Equalizer: A type of equalizer with sliding controls that creates a pattern representing a graph of the frequency-response changes. Raising sliders boosts the affected frequencies; lowering sliders cuts (attenuates) the affected frequencies.High Pass: A filter that passes high frequencies, and attenuates low frequencies. Same as low cut.Hz: Hertz or cycles per second. Something that repeats a cycle once each second moves at a rate of 1 Hz.Incue/Inq/In-Point: These words all refer to the initial few seconds of audio signifying the beginning of the production.Impedance: A measure of the impediment to the flow of alternating current, measured in ohms at a given frequency. Larger numbers mean higher resistance to current flow.KHz: Kilohertz or one thousand Hz.Lavaliere: A small microphone that attaches to clothing, allowing the speaker to have a hands-free presentation.Line Array: A group of speakers that have been arrayed or “built up” in the vertical or horizontal plane, which allow for a highly consistent sound field. A Line Array is perfect for medium to large audiences.Midbass: The middle of the bass part of the frequency range, from approximately 50 to 100 Hz (upper bass would be from 100 to 200 Hz). Also used as a term for loudspeaker drivers designed to reproduce both bass and midrange frequencies. Midrange: The middle of the audio frequency range. Also used as a term for loudspeaker drivers designed to reproduce this range. Mixer: This is the unit in which audio signals are directed from. A mixer provides for both mic and line input combinations while allowing you to control one or more outputs.MP3: MPEG-1 Audio Layer-3. Compression scheme used to transfer audio files via the Internet and store in portable players and digital audio servers. Natural Sound (NATS): The nonverbal audio that occurs in a non-studio setting. NATS can be used to help characterize the setting.Noise: An unwanted portion of a signal such as hiss, hum, whine, static, or buzzing.Passive: Not active. A passive crossover uses no external power and results in insertion loss. A passive speaker is one without internal amplification.Phase: Time relationship between signals; it's all relative.Power Output: A measure, usually in watts, of how much energy is modulated by a component.Preamplifier: A control and switching component that may include equalization functions. The preamp comes in the signal chain before the amplifiers.surround processor portion of the receiver and the input of the amplifier portion of the receiver.Processors: Anything that processes an incoming signal in some way. Surround processors, for example, can decode a Dolby Digital signal to send to an amp so you can hear it.Pulse Code Modulation: (PCM) a way to convert sound or analog information to binary information (0s and 1s) by taking samples of the sound and record the resulting number as binary information. Used on all CDs, DVD-Audio, and just about every other digital audio format. It can sometimes be found on DVD-Video.RF: Radio Frequency. Television signals are modulated onto RF signals and are then demodulated by your television's tuner. VCRs and DBS receivers often include channel 3 or 4 modulators, allowing the output signal to be tuned by the television on those channels. Also, laser discs used an RF signal for modulating Dolby Digital 5.1 soundtracks on some movies. This requires an RF demodulator (usually referred to as an AC3-RF demodulator) before or in the surround processor to decode the signal. RMS: Root Mean Square or the square root of the arithmetic mean (average) of the square's set of values. A reasonably accurate method of describing an amplifier's power output. Signal-to-Noise Ratio: A comparison of the signal level relative to the noise level. Larger numbers are better. Simultaneous Interpretation: This system allows attendees to hear the meeting in their own language. Sound field: The total acoustical characteristics of a space, such as ambience; number, timing, and relative level of reflections; ratio of direct to reflected sound; RT-60 time; etc. Speaker: A component that converts electrical energy into acoustical energy. SPL: Sound-Pressure Level. Measured in dB. Subwoofer: A speaker designed to reproduce very low bass frequencies, usually those below about 80 Hz.THX: Certification program for home theater equipment. Uses some proprietary features, but mostly assures a base quality level for a given room size. (See THX Select or Ultra.) Is compatible with any and all soundtrack formats. Stands for either Tom Holman's eXperiment, after the engineer who drafted the original standard, or is named after the company's founder George Lucas' first movie, THX 1138. Nobody agrees on which.

30 other products in the same category: