DiGiCo SD7-SD Rack Package Used, Second hand

1pc  SD7 control surface in flight case with 2 Redundant Engines and power supplies
1pc  SD Rack with 56 analogue in / 40 analogue out / 8x AES XLR out and MADI & Fibre Link.

Photos on request.

More details

1.06.447
Used

69,000.00 €

69,000.00 € per Set

INQUIRE ABOUT THIS

 
About this product

SD7

Redefines the boundaries of live sound mixing using Stealth Digital Processing
“With great power comes great responsibility...”

If it's everything that you're after, the SD7 is the console for you. Our flagship model offers mind-blowing I/O capabilities and sets new standards in high-density digital processing via our proprietary Stealth mixing and routing engine and game-changing, Super FPGA technology.
To put that into perspective, it delivers eight times the power of our industry standard D5 Live.

Scratching the surface

A combination of technologies have been seamlessly integrated into the SD7's worksurface to meet the everyday needs of any touring engineer. We've managed to pack them into three user-friendly interactive 15-inch high-resolution touch screens, each of which accommodates a bank of 12 faders,  to provide the user with the perfect platform – everything is just 'where it should be'.
To make navigation even easier, we've added high-definition interactive meter bridges and multicoloured knobs and switches; and for further functionality and flexibility, 16 assignable faders (one bank of 12, one bank of four) sit neatly below the master screen in the centre of the console, taking the SD7's fader tally to a sizeable 52.
To increase the fader count further for multi-engineer applications and shows, an EX-007 Fader Expansion unit is available. Two EX-007s can be connected via a simple Cat5e connector for remote control or simply to increase your fader count to 100.

What's under the hood?

If knowledge really is power, SD7 is our Einstein: it boasts a massive 256 processing paths at 48kHz/96kHz (or 128 at 192kHz).
Standard channel processing, whether inputs or outputs, includes Channel Delay, DiGiTube, Single and Multi Channel Presets, Dual insert points, Hi- and Lo-pass filters @ 24dB/octave, four-band parametric EQ (eight on outputs) with band curve selection and Dynamic EQ on each band, Dual insert points, DiGiCo's DYN 1 (Compressor, De-esser or Multi Channel Compressor) and DYN 2 (Gate, Compressor or Ducker).
The master section incorporates 32 gangable 32-band graphic EQs, 48 stereo effects, and 36 control groups (VCAs); and using snapshots, engineers can now switch between complete configurations in any live environment easier than ever before, be it at rehearsals, during system setup, or even at a show.
In addition, we've included 128 busses, all of which are assignable as mono/stereo groups or auxiliary busses; and in addition to these busses, for further configurability, we've provided a 32 x 32 output matrix , dual solo busses, and a Master buss. Essentially, users have the equivalent of 160 busses of DSP at their disposal.
Unlike all other digital console manufacturers, you don't lose Aux or Group Busses when using the Matrix as they are in addition, including the Master buss.

I/O

The SD7's local I/O includes 12 analogue inputs, 12 analogue outputs and 12 AES I/O (mono); and when coupled with a second engine, with four redundant MADI ports per engine, and one Optocore loop with the ability for an option for a second to be fitted.
This amounts to a monumental 1392 I/O connections on a single optic loop with one worksurface.
In addition, there is an optional DiGiCo SoundGrid module which can be fitted to both engines for full redundancy when linked to two external PC servers such as SoundGrids or DiGiGrids. This provides the user with instant access to 32 fully integrated low-latency Waves stereo Multi Racks, each with the ability to have up to eight plugins per rack. That's 128 I/O - and as you'd expect from DiGiCo, this is all additional I/O.
All Waves compatible plugins are pre-loaded, and as this is integral within the console, you have the added advantage of touch screen control; and all shapshots and session files are saved within the console.

Used DiGiCo

DiGiCo is a British company, founded in 2002, that manufactures digital audio mixing concoles targeted for live audio mixing applications.
DiGiCo's most current console lineup comprises the SD-Series of consoles, powered by Stealth Digital Processing. Pioneered with their flagship SD7, Stealth Digital Processing describes DiGiCo's first use of a single large scale FPGA for audio processing. Combined with Tiger SHARC DSP chips for effects processing and control, this new technology allows an entire audio engine to occupy only a single PCB.
The SD7 continues to be the flagship of the range, with consoles derived from it targeting other market areas and sizes of application. Currently the rest of the range comprises the SD5, SD10, SD8, SD9 and rack-mountable SD11, listed in order of size. T (Theatre) and B (Broadcast) software is also available for selected consoles.
Legacy DiGiCo consoles include the D1 and D5 Live platforms, as well as the D5T theatre console and DS00 studio production and broadcast console.
The D-Series of consoles used a modular DSP engine, combining multiple SHARC DSP chips to form a large scale audio engine, still the method by which virtually all digital console manufacturers design their products

Equalizer: A component designed to alter the frequency balance of an audio signal. Equalizers may be graphic, parametric, or a combination of both. Fade: A gradual increase in audio, i.e. a fade-up, or a gradual decrease in audio, i.e. a fade-down.Feedback: The transmission of current or voltage from the output of a device back to the input, where it interacts with the input signal to modify operation of the device. Feedback is positive when it's in phase with the input and negative when it's out of phase. Frequency: The number of cycles (vibrations) per second. In audio, audible frequencies commonly range from 20 to 20,000 cycles per second (Hz). In video, frequency is used to define the image resolution. Low-frequency video images depict large objects or images. Higher frequencies depict smaller objects (finer details). Frequency Response: A measure of what frequencies can be reproduced and how accurately they are reproduced. A measurement of 20 to 20,000 Hz, 3dB means those frequencies between 20 and 20,000 Hz can be reproduced no more than 3 dB above or below a reference frequency level. Full-Range: A speaker designed to reproduce the full range (20 Hz to 20 kHz) of audio frequencies.Gain: Increase in level or amplitude.Gooseneck: This refers to amicrophone with a flexible neck that is most frequently attached to a podium or lectern. It is designed to allow the speaker to raise or lower the microphone to a suitable height.Graphic Equalizer: A type of equalizer with sliding controls that creates a pattern representing a graph of the frequency-response changes. Raising sliders boosts the affected frequencies; lowering sliders cuts (attenuates) the affected frequencies.High Pass: A filter that passes high frequencies, and attenuates low frequencies. Same as low cut.Hz: Hertz or cycles per second. Something that repeats a cycle once each second moves at a rate of 1 Hz.Incue/Inq/In-Point: These words all refer to the initial few seconds of audio signifying the beginning of the production.Impedance: A measure of the impediment to the flow of alternating current, measured in ohms at a given frequency. Larger numbers mean higher resistance to current flow.KHz: Kilohertz or one thousand Hz.Lavaliere: A small microphone that attaches to clothing, allowing the speaker to have a hands-free presentation.Line Array: A group of speakers that have been arrayed or “built up” in the vertical or horizontal plane, which allow for a highly consistent sound field. A Line Array is perfect for medium to large audiences.Midbass: The middle of the bass part of the frequency range, from approximately 50 to 100 Hz (upper bass would be from 100 to 200 Hz). Also used as a term for loudspeaker drivers designed to reproduce both bass and midrange frequencies. Midrange: The middle of the audio frequency range. Also used as a term for loudspeaker drivers designed to reproduce this range. Mixer: This is the unit in which audio signals are directed from. A mixer provides for both mic and line input combinations while allowing you to control one or more outputs.MP3: MPEG-1 Audio Layer-3. Compression scheme used to transfer audio files via the Internet and store in portable players and digital audio servers. Natural Sound (NATS): The nonverbal audio that occurs in a non-studio setting. NATS can be used to help characterize the setting.Noise: An unwanted portion of a signal such as hiss, hum, whine, static, or buzzing.Passive: Not active. A passive crossover uses no external power and results in insertion loss. A passive speaker is one without internal amplification.Phase: Time relationship between signals; it's all relative.Power Output: A measure, usually in watts, of how much energy is modulated by a component.Preamplifier: A control and switching component that may include equalization functions. The preamp comes in the signal chain before the amplifiers.surround processor portion of the receiver and the input of the amplifier portion of the receiver.Processors: Anything that processes an incoming signal in some way. Surround processors, for example, can decode a Dolby Digital signal to send to an amp so you can hear it.Pulse Code Modulation: (PCM) a way to convert sound or analog information to binary information (0s and 1s) by taking samples of the sound and record the resulting number as binary information. Used on all CDs, DVD-Audio, and just about every other digital audio format. It can sometimes be found on DVD-Video.RF: Radio Frequency. Television signals are modulated onto RF signals and are then demodulated by your television's tuner. VCRs and DBS receivers often include channel 3 or 4 modulators, allowing the output signal to be tuned by the television on those channels. Also, laser discs used an RF signal for modulating Dolby Digital 5.1 soundtracks on some movies. This requires an RF demodulator (usually referred to as an AC3-RF demodulator) before or in the surround processor to decode the signal. RMS: Root Mean Square or the square root of the arithmetic mean (average) of the square's set of values. A reasonably accurate method of describing an amplifier's power output. Signal-to-Noise Ratio: A comparison of the signal level relative to the noise level. Larger numbers are better. Simultaneous Interpretation: This system allows attendees to hear the meeting in their own language. Sound field: The total acoustical characteristics of a space, such as ambience; number, timing, and relative level of reflections; ratio of direct to reflected sound; RT-60 time; etc. Speaker: A component that converts electrical energy into acoustical energy. SPL: Sound-Pressure Level. Measured in dB. Subwoofer: A speaker designed to reproduce very low bass frequencies, usually those below about 80 Hz.THX: Certification program for home theater equipment. Uses some proprietary features, but mostly assures a base quality level for a given room size. (See THX Select or Ultra.) Is compatible with any and all soundtrack formats. Stands for either Tom Holman's eXperiment, after the engineer who drafted the original standard, or is named after the company's founder George Lucas' first movie, THX 1138. Nobody agrees on which.

30 other products in the same category: