CAMCO DL 1500-P-PS10 TD Used, Second hand

Used Amprack with DL 1500-P 2ch power amplifier,PS10 TD controller and patch panel.

Photos on request.

More details

1.07.341
Used

580.00 €

580.00 € per Piece

INQUIRE ABOUT THIS

 
About this product

DL 1500-P

Following on from the introduction of the CAMCO Q-Power series of 4 channel amplifiers, the D-Power series develops the range further with the introduction of six 2 channel models. The D-Power D05 250 Wper channel, D1 500 W per channel, D2 1000 W per channel, the D3 1500 W per channel and the D4 2000 Wper channel and D7 3300 W per channel. All six models have once again been designed to provide that, Powerful Pure Sonic Performance which is now so synonymous with the CAMCO brand name

New Platform

The D7/D4/D3/D2 models utilise a Hybrid Class H amplifier engine, while the D05 and D1 use the new UMAC Class-D technology, All offering smooth and responsive handling throughout the power range. All models benefit from the latest advances in CAMCO’s SMPS technology, the resulting light weight units are at home in all professional applications. Use in combination with the Q-Power series or on their own, the D-Power series delivers pure and reliable power for applications where cost and ease of use are paramount without lose of integrity.

Designed for flexibility of Use

The introduction of the D-Power series now expands the choice and ability to refine system specification to exact requirements. D-Power power output specifications have been select to work as stand alone amplifiers or in combination with Q-Power series so that exact power formats can be matched, minimizing rack space and maintaining family function and design.

Simple Direct Approach

Once again paying great attention to market requirements for a strait forward approach, with the D-Power series CAMCO has identified key elements, such as power output range, flexible connectivity and interaction. The resulting six models are of rugged design and suitable for professional Installations, Theatre and Live Sound application.

PS10 TDController

The PS10 TDController is an advanced analogue processor that allows the PS10 Loudspeaker and optional LS500 Subwoofer to achieve exceptional performance from such compact packages. The PS10 TD provides crossover, sensed amplifier control and system equalisation optimised for the PS10 and LS500. One PS10 TD has two inputs and three outputs, L, R and summed sub out, minimising installation cost and complexity. Like all Nexo processors, the PS10 TD provides precision dynamic, voice coil temperature and diaphragm displacement protection through the use of selective Voltage Controlled Equalisers (VCEQs), reducing levels only at frequencies when and where necessary.
The PS10 Loudspeaker System is the foundation of Nexo’s acclaimed PS Series; versatile, compact, full-range loudspeakers tailored for a wide range of touring and installed sound reinforcement applications. Like all Nexo products, the PS10 Loudspeaker and optional LS500 Subwoofer are designed to work with advanced electronic processors, guaranteeing consistent performance and reliability of the highest standard.

Product Features
  • Precision circuits engineered for the PS10/LS500 systems permit increased sound pressure and operational reliability
  • Servo controlled VCEQs provide precise dynamic control without spectral imbalance
  • 2 inputs and 3 outputs enable a single PS10 TD to manage multiple PS10 and LS500 products
  • Comprehensive indicators and controls
Product Features
  • Touring, installed PA for clubs, A/V, theater, broadcast, etc.
  • High quality stage monitoring for clubs, A/V, theater, broadcast, etc.
  • Fill-in system in conjunction with larger Nexo PS/Alpha systems.

Used CAMCO

CAMCO is a manufacturer of high-end pro audio amplifiers, DSP- and audio network solutions, which have gained a worldwide reputation for transparent sonic performance, extreme power and ultra reliability.
Founded in 1983, CAMCO has for more than 25 years focused its attention on the design and development of professional power amplifiers.
The CAMCO name stands for the best - the very best for our worldwide clientele

Equalizer: A component designed to alter the frequency balance of an audio signal. Equalizers may be graphic, parametric, or a combination of both. Fade: A gradual increase in audio, i.e. a fade-up, or a gradual decrease in audio, i.e. a fade-down.Feedback: The transmission of current or voltage from the output of a device back to the input, where it interacts with the input signal to modify operation of the device. Feedback is positive when it's in phase with the input and negative when it's out of phase. Frequency: The number of cycles (vibrations) per second. In audio, audible frequencies commonly range from 20 to 20,000 cycles per second (Hz). In video, frequency is used to define the image resolution. Low-frequency video images depict large objects or images. Higher frequencies depict smaller objects (finer details). Frequency Response: A measure of what frequencies can be reproduced and how accurately they are reproduced. A measurement of 20 to 20,000 Hz, 3dB means those frequencies between 20 and 20,000 Hz can be reproduced no more than 3 dB above or below a reference frequency level. Full-Range: A speaker designed to reproduce the full range (20 Hz to 20 kHz) of audio frequencies.Gain: Increase in level or amplitude.Gooseneck: This refers to amicrophone with a flexible neck that is most frequently attached to a podium or lectern. It is designed to allow the speaker to raise or lower the microphone to a suitable height.Graphic Equalizer: A type of equalizer with sliding controls that creates a pattern representing a graph of the frequency-response changes. Raising sliders boosts the affected frequencies; lowering sliders cuts (attenuates) the affected frequencies.High Pass: A filter that passes high frequencies, and attenuates low frequencies. Same as low cut.Hz: Hertz or cycles per second. Something that repeats a cycle once each second moves at a rate of 1 Hz.Incue/Inq/In-Point: These words all refer to the initial few seconds of audio signifying the beginning of the production.Impedance: A measure of the impediment to the flow of alternating current, measured in ohms at a given frequency. Larger numbers mean higher resistance to current flow.KHz: Kilohertz or one thousand Hz.Lavaliere: A small microphone that attaches to clothing, allowing the speaker to have a hands-free presentation.Line Array: A group of speakers that have been arrayed or “built up” in the vertical or horizontal plane, which allow for a highly consistent sound field. A Line Array is perfect for medium to large audiences.Midbass: The middle of the bass part of the frequency range, from approximately 50 to 100 Hz (upper bass would be from 100 to 200 Hz). Also used as a term for loudspeaker drivers designed to reproduce both bass and midrange frequencies. Midrange: The middle of the audio frequency range. Also used as a term for loudspeaker drivers designed to reproduce this range. Mixer: This is the unit in which audio signals are directed from. A mixer provides for both mic and line input combinations while allowing you to control one or more outputs.MP3: MPEG-1 Audio Layer-3. Compression scheme used to transfer audio files via the Internet and store in portable players and digital audio servers. Natural Sound (NATS): The nonverbal audio that occurs in a non-studio setting. NATS can be used to help characterize the setting.Noise: An unwanted portion of a signal such as hiss, hum, whine, static, or buzzing.Passive: Not active. A passive crossover uses no external power and results in insertion loss. A passive speaker is one without internal amplification.Phase: Time relationship between signals; it's all relative.Power Output: A measure, usually in watts, of how much energy is modulated by a component.Preamplifier: A control and switching component that may include equalization functions. The preamp comes in the signal chain before the amplifiers.surround processor portion of the receiver and the input of the amplifier portion of the receiver.Processors: Anything that processes an incoming signal in some way. Surround processors, for example, can decode a Dolby Digital signal to send to an amp so you can hear it.Pulse Code Modulation: (PCM) a way to convert sound or analog information to binary information (0s and 1s) by taking samples of the sound and record the resulting number as binary information. Used on all CDs, DVD-Audio, and just about every other digital audio format. It can sometimes be found on DVD-Video.RF: Radio Frequency. Television signals are modulated onto RF signals and are then demodulated by your television's tuner. VCRs and DBS receivers often include channel 3 or 4 modulators, allowing the output signal to be tuned by the television on those channels. Also, laser discs used an RF signal for modulating Dolby Digital 5.1 soundtracks on some movies. This requires an RF demodulator (usually referred to as an AC3-RF demodulator) before or in the surround processor to decode the signal. RMS: Root Mean Square or the square root of the arithmetic mean (average) of the square's set of values. A reasonably accurate method of describing an amplifier's power output. Signal-to-Noise Ratio: A comparison of the signal level relative to the noise level. Larger numbers are better. Simultaneous Interpretation: This system allows attendees to hear the meeting in their own language. Sound field: The total acoustical characteristics of a space, such as ambience; number, timing, and relative level of reflections; ratio of direct to reflected sound; RT-60 time; etc. Speaker: A component that converts electrical energy into acoustical energy. SPL: Sound-Pressure Level. Measured in dB. Subwoofer: A speaker designed to reproduce very low bass frequencies, usually those below about 80 Hz.THX: Certification program for home theater equipment. Uses some proprietary features, but mostly assures a base quality level for a given room size. (See THX Select or Ultra.) Is compatible with any and all soundtrack formats. Stands for either Tom Holman's eXperiment, after the engineer who drafted the original standard, or is named after the company's founder George Lucas' first movie, THX 1138. Nobody agrees on which.

30 other products in the same category: